Bimini-Top UNIVERSAL for roll bar BARCA
The Bimini Top UNIVERSAL is handy and sturdy and thanks to its telescopic AISI 316 stainless steel structure, easy to be closed with spring buttons. Suggested for the installation on stainless steel shaped boat roll bars (like our model BARCA). The roll bar is not included in the scope of delivery!
Note: The sizes given refer to the installation width at the lower edge of the roll bar from the center of the base plate to the center of the base plate. The width of the arch at the top is about 25cm less than the base of the roll bar. For applications on roll bars with a different shape than the one ion the Picture, request a Quote.
Frame details
Dismountable telescopic structure (Ø 25/20 mm) made from AISI 316 polished stainless steel tubes.
Fabric details
The sunroof material is the AIRTEX® fabric from Mehler Texnologies, it is weatherproof and UV-resistant, antimicrobial, as well as dirt and water-repellent. The fabric complies with the UNI EN 24920 standard and is available in 14 different colours. This 200 g/m² light fabric is a 100% polyester fabric that is acrylate-coated and impregnated on one side. The special coating gives the material a distinctive textile character. With a total weight of only 200 g/sqm, this quality achieves a very good sun protection effect according to UV Standard 801.
Joints and screws
All screws and joints are made of AISI 316 stainless steel.
Max. speed
The maximum recommended speed when cruising and the bimini is set up is 15 knots.
Dimensions
The width (D) depends on your width choice of this product.
The length (B) is 205 cm.
NOTE: The available sizes (width) refer to the installation width at the bottom of the roll bar, from the centre of the plate to the centre of the plate. The width of the arch at the top is about 25cm less than the base of the roll bar.
Scope of delivery
- Velcro closure storage bag (same colour like the bimini)
- 1 pair of 316 stainless steel concave deck hinges
- 10 Metes rope and 4 tensioner plates made from stainless steel
Manufacturer: | Nettuno |
Category: | Bimini-Top for roll bars |
SKU: | 49065 |
Shipping weight: | 8,00 kg |
Item weight: | 5,00 kg |
Manufacturer information:
The starting point
The first measurement to take is the width between the right centre gunwale to the left centre one of the boat or, in case of an inflatable boat, the width between the right centre tubular to the centre left one.
From this size it can be evaluated which model of Bimini Top can be installed.




Thanks to the elasticity of its frame, the Bimini has an installation tolerance.
So, when the width of the boat is different from a standard one, is it possible to install a lower installation width from the real one.
However to grant a correct installation and optimal performance, we reccomend that the difference between widths is no more than 5%. On the contrary, we do not recommend to install a Bimini that has an installation width greater than the real width measured.
Example: A Bimini with an installation width of 200cm can be installed for real widths ranging from 200 to 210cm. But not for less than 200cm

Which height should be choosen?
The Bimini Tops are produced in height 95cm, 115cm and 140cm.
- A 95cm high Bimini Top is suitable for installations on boats with very high gunwales or for fastboats where it is not possible to stand up.
- A 115cm high Bimini Top is suitable for installation on guard rails or on boats with a minimum height of 80cm.
- For installation on gunwales of about 60cm. an height of 140cm is generally recommended



What is the difference between 2, 3 or 4 arches?
The transverse tube of the Bimini Top that crosses the boat in the direction of width is defined as an "arch". A greater number of arches are reflected in a greater strength of the frame and in a better tension of the covering fabric. Also higher speeds while having the Bimini Top unfolded are possible.
An important element to consider is the choice of the fabric
The following two fabrics are available:
- Resin-coated polyester is used on Bimini Tops with light frames, like on the models ELEGANCE, ELEGANCE PLUS and CHIC with Ø 20/25mm Aluminium tube or the models SPORT and SPORT PLUS with Ø20mm stainless steel tubes.
- Resin-coated acrylic is employed on Bimini-Tops with stronger frames like on the models ROYAL, ROYAL XL, LOOK UP, PRESTIGE and EXCLUSIVE with Ø 22/25/30mm stainless steel frame.
The frame is made of tubes and the diameter of these ones influences the overall strength of the Bimini Top.
The available diameters are 20/22/25/30mm:
- The aluminium or stainless steel frames with a diameter of 20mm are handy and light and suitable for small boats
- Whereas those with a diameter 22/25 or 30mm are recommended for larger boats. Whole stainless steel frames are very strong and of great aesthetic impact.
Another element to consider is the material of the jaw slides.
Nylon jaw slides are applied on light Bimini Tops with reduced dimensions, whereas stainless steel ones are applied to larger structures.
Deck hinges are elements that allow installing the Bimini Top in different ways. On the floor, on the guard rail, on sliding rails or on the tubulars of inflatable boats. Deck hinges can be chosen according to the various aesthetic and functional requirements, for any boat, both in nylon or stainless steel.
0