Bimini-Top CHIC with 3 arches and Ø 25 mm aluminium frame
With its low weight (Ø 25 mm aluminum rods) and its robustness (stainless steel fittings), this sun cover is suitable for almost all medium-sized boat types. It is a recommendation for mounting on the railing, especially due to the dimensions of the rods.
Foldable structure (Ø 25 mm) with white lacquered aluminium-magnesium-silicon alloy.
The sunroof material is the AIRTEX® fabric from Mehler Texnologies, it is weatherproof and UV-resistant, antimicrobial, as well as dirt and water-repellent. The fabric complies with the UNI EN 24920 standard and is available in 14 different colours. This 200 g/m² light fabric is a 100% polyester fabric that is acrylate-coated and impregnated on one side. The special coating gives the material a distinctive textile character. With a total weight of only 200 g/sqm, this quality achieves a very good sun protection effect according to UV Standard 801.
Joints and screws
White nylon reinforced with fibreglass high mechanical and corrosion-resistant properties. Stainless steel and aluminium screws.
The maximum recommended speed when cruising and the bimini is set up is 18 knots.
The bimini top is available in two different heights (C) 95 cm, 115 cm or 140 cm:
The height (D) of the folded convertible is 120 cm if your choosen height 95 cm, it is 160 cm with a height of 115 cm and 180 cm with a height of 140 cm.
The length (B) is 150 cm (with a height of 95 cm) or 200 cm (with a height of 115 cm) and 230 cm (with a height of 140 cm).
When the bmini top is completely folded and Ready to store the dimensions are: width x 40cm (16") x 8cm(3")
Scope of delivery
- Zippered storage bag (same Colour like the bimini)
- 1 pair of white straps with stainless steel Hardware.
Please note that the fittings to mount your bimini to your boat are not included. These must be ordered separately.
The scope of delivery only includes the bimini frame fittings (see article picture).
|Shipping weight:||13,00 kg|
|Item weight:||10,00 kg|
The starting point
The first measurement to take is the width between the right centre gunwale to the left centre one of the boat or, in case of an inflatable boat, the width between the right centre tubular to the centre left one.
From this size it can be evaluated which model of Bimini Top can be installed.