Premium Bimini-Top mounting kit for PVC inflatables / RIB'S

These high quality fork hinges are made from polished AISI 316 stainless steel and vulcanized to a flexible backing plate made from Grey EPDM material.

EPDM support has been designed to be glued on the RIB tubes.
The appropriate 2-component adhesive for PVC material is included in the scope of delivery. (125ml)

These supports allows easy assembly and disassembly of the bimini top.

Dimensions fork: 90x40 mm
Dimensions EPDM plate: 188x135 mm
Color EPDM plate: Grey (RAL 7035)

Premium Bimini-Top mounting kit for Hypalon / Neoprene inflatables / RIB'S

These high quality fork hinges are made from polished AISI 316 stainless steel and vulcanized to a flexible backing plate made from Grey EPDM material.

EPDM support has been designed to be glued on the RIB tubes.
The appropriate 2-component adhesive for Hypalon / Neoprene material is included in the scope of delivery. (125ml)

These supports allows easy assembly and disassembly of the bimini top.

Dimensions fork: 90x40 mm
Dimensions EPDM plate: 188x135 mm
Color EPDM plate: Grey (RAL 7035)

Deck hinge set with snap hooking system for bimini-tops

Deck hinge set with snap hooking system made from AISI 316 Stainless steel (premium quality). 
Easy and quick assembly and disassembly of complete bimini-top.

Dimensions: 90x40 mm
Opening width : 7 mm
Ø bolt: 6 mm

180° swiveling deck hinge set for bimini tops

These 180° swiveable deck hinges are made from polished AISI 316 stainless steel. (premium quality).

The fittings can be used for mounting on the hull on deck.

Deck hinge set with swivel ball for bimini tops

These deck hinges have a 360° swviel ball. Made from polished AISI 316 stainless steel. (premium quality).

Dimensions: Length = 82 mm, Width = 29 mm.

Available for Ø 22 and 25 mm tube.

Flush mount deck hinge set with snap hooking system for bimini-tops

Flush mount deck hinge set with snap hooking system made from AISI 316 Stainless steel (premium quality). 
Easy and quick assembly and disassembly of complete bimini-top.

The removable spigot can be turned and locked horizontally in 90° steps in the installation base.

Base dimensions: 54x29 mm
Bolt Ø: 6 mm
Opening width: 8 mm
Total height: 50 mm

Railing mount quick release joint fitting set for bimini tops

Made from polished AISI 316 stainless steel.

With locking lever for quick opening and closing of the slider on the railing tube. This makes it easy to slide the holder back and forth or move it on the railing tube. The eye end of the bimini can also be assembled and disassembled with a spring pin without any tools.

Available for Ø 22 und 25 mm railing tubes.

Railing mount fitting with swivel ball for bimini tops

These railing mount joints have a 360° swivel ball and are made from polished AISI 316 Stainless steel. (premium quality).

Dimensions: Length = 97 mm, Width = 32 mm.

Availabe for Ø 22 and 25 mm tube.

Ø 20 mm aluminium tube (white coated) - 1 meter length.

TEX'AKTIV clean and care kit for Bimini-Tops

Tex'Aktiv CLEAN fabric cleaner from SUNBRELLA / DICKSON

Powerful outdoor fabrics cleaner recommended to eliminate stains and odours from sun shades, Bimini-Tops, cushions and deckchairs textiles.
The use of TEX'AKTIV CLEAN will reduce the waterproof properties of textiles. So, after each cleaning process it is necessary to apply TEX'AKTIV to remake fabric waterproof and protect them from dirt.

Yield: about 15 m² per 1 Liter.

TEX'AKTIV GUARD waterproofing agent from SUNBRELLA / DICKSON

Fabric waterproofing agent with water-repellent effect. TEX'AKTIV GUARD protects fabrics agaist stains and dirt build-up. This product is ideal for marine textiles, cushions and sun shades. It prevents water and grease from penetrating into the fabric. The colourless beading effect gives all your outdoor fabrics a fresh boost!

Yield: about 15 m² per 1 Liter.

Deck hinge set for bimini top straps

These high-quality fittings made of  polished AISI 316 stainless steel are suitable for mounting on deck or other flat surfaces. With detachable bracket that can be continuously adjusted from 5° to 125°.

The fittings are supplied including white rubber pads. The belt tensioning bolt is equipped with a corrugated profile and thus prevents the tension belts from loosening unintentionally and on their own.

Max. strap width : 30 mm
Base dimensions: 69x34 mm
Bolt circle: 45 mm

Complete rail kit "DE LUXE" for Bimini-Tops

This rail kit is recommended for Bimini-Tops with Ø 25 mm aluminium frame or Ø 22 mm Stainless steel frame and also for medium sized boats.

The rails and all fittings are made from polished AISI 316 Stainless steel and allows the top supports to be moved.

This high-quality rail system also impresses with its elegant appearance, which is achieved through the two-part rail construction with concealed screws. The fittings are mounted on a sliding carriage with a stopper.

The set includes:

• 2 stainless steel rails (each 120 cm long - can be shortened as desired)
• 2 sliders which run on the rails and carry the deck fitting
• 2 deck fittings to accommodate the bimini
• 2 end pieces for a clean finish to the rail
• 2 stoppers to fix the bimini in the desired position

Front extension for Bimini-Top CHIC with 3 arches

The Bimini Top extension canvas, is used to improve the surface of shade on boats and RIBs.

Material: Made with the same fabric and colour of the chosen model

Dimensions: Lenght 150cm - Width as the Bimini-Top.

Installation: The extension canvas is fixed to the main canvas of the Bimini Top with a detachable zip. At the other end of the extension canvas there are 316 stainless steel rings in which it is possible to pass an elastic rope to be hooked on any point of the boat.

Rear extension for Bimini-Top CHIC with 3 arches

The Bimini Top extension canvas, is used to improve the surface of shade on boats and RIBs.

Material: Made with the same fabric and colour of the chosen model

Dimensions: Height and width as the Bimini-Top.

Installation: The extension canvas is fixed to the main canvas of the Bimini Top with a detachable zip. At the other end of the extension canvas there are 316 stainless steel rings in which it is possible to pass an elastic rope to be hooked on any point of the boat.

Leteral extension for Bimini-Top CHIC with 3 arches

The Bimini Top extension canvas, is used to improve the surface of shade on boats and RIBs.

Material: Made with the same fabric and colour of the chosen model

Dimensions: Height as the Bimini-Top - Length as the Bimini-Top.

Installation: The extension canvas is fixed to the main canvas of the Bimini Top with a detachable zip. At the other end of the extension canvas there are 316 stainless steel rings in which it is possible to pass an elastic rope to be hooked on any point of the boat.

Note: It is also possible to order a single extension canvas that can be hooked on the right or in the left indifferently.

Crystal Clear window upgrade for the extension

In order to remain protected from the weather, but still have an overview of the water and still get enough daylight under the Bimini-Top, the extension has a transparent, waterproof and UV-resistant clear window. The extension keeps an all-round, 20 cm wide edge made of the conventional bimini cover material, so that zips and eyelets can also be attached securely and safely.

Material: Clear PVC (thickness: 0.75 mm = 940 g / m²), UV-resistant and waterproof. Particularly good visual acuity.

Plesase choose the amount for how many extensions you would like to have a window upgrade.
If you only want a window in certain extensions, please let us know in the comments field at the end of the ordering process.

Mesh upgrade for the leteral extension

This upgrade offers the optimal compromise between shade, air circulation and overview due to the integrated micro-perforated SERGE FERRARI Batyline net. The sun's rays are significantly reduced and stagnant heat is avoided more easily. In addition, the net allows a better view to the outside compared to a closed Extension. The extension keeps an all-round, 20 cm wide edge made of the conventional bimini cover material, so that zips and eyelets can also be attached securely and safely.

Material: SERGE FERRARI batyline with high resistance and high light transmission with low weight (500g/m²). In addition, it is mold-resistant according to EN ISO 846-A and is PVC-coated on both sides using a special coating process, thus protecting the colors from UV rays, wind and weather.

Plesase choose the amount for how many extensions you would like to have a mesh upgrade.
If you only want a mesh in certain extensions, please let us know in the comments field at the end of the ordering process.

Adding a roller blind for window or mesh extensions

In order to use the advantages of the crystal clear windows or meshes used in the bimini extensions, but still not want to miss the possibility of having complete sun and privacy protection, these roll-up blinds should be used as an option.

When rolled up, the roller blind is held in position with two retaining straps and when lowered, it is fixed with attached Velcro strips.

Material: Same material (same color) as the Bimini top and the extensions.

Plesse choose the quantity of how many roller blinds you would like to have.
If you only want blinds on only certain extensions, please let us know in the comments field at the end of the order process.

Adding vertical zipper to connect the extensions

By adding this vertical zipper connection, the extensions are connected together, so it is possible to protect yourself even better against environmental influences on board.

Please choose how many zippers you would like to have.
If you only want a zipper in certain corners, please let us know in the comments field at the end of the ordering process.

Please note that if this option is chosen, the front extension will be the same length as the height of the bimini. Not the usual 150cm length for front extensions. By default, the rear and side extensions are set to the height of the bimini top, so no adjustment is made here.

Customized Print

Customized printing of color drawings, logos, phrases on helm covers, extension canvases made of polyester or acrylic fabric, PVC or PVC mesh.
Printed files should be with maximum sizes of 30cm x 30cm and should be in vector format (.ai/.pdf).

Estimates for other formats and graphic works are possible and can be asked.