Bimini-Top ELEGANCE with 2 arches

Thanks to the elasticity of its frame, the Bimini has an installation tolerance.

So, when the width of the boat is different from a standard one, is it possible to install a lower installation width from the real one.

However to grant a correct installation and optimal performance, we reccomend that the difference between widths is no more than 5%. On the contrary, we do not recommend to install a Bimini that has an installation width greater than the real width measured.

Example: A Bimini with an installation width of 200cm can be installed for real widths ranging from 200 to 210cm. But not for less than 200cm

Which height should be choosen?

The Bimini Tops are produced in height 95cm, 115cm and 140cm.

• A 95cm high Bimini Top is suitable for installations on boats with very high gunwales or for fastboats where it is not possible to stand up.
• A 115cm high Bimini Top is suitable for installation on guard rails or on boats with a minimum height of 80cm.
• For installation on gunwales of about 60cm. an height of 140cm is generally recommended

What is the difference between 2, 3 or 4 arches?

The transverse tube of the Bimini Top that crosses the boat in the direction of width is defined as an "arch". A greater number of arches are reflected in a greater strength of the frame and in a better tension of the covering fabric. Also higher speeds while having the Bimini Top unfolded are possible.

An important element to consider is the choice of the fabric

The following two fabrics are available:

• Resin-coated polyester is used on Bimini Tops with light frames, like on the models ELEGANCE, ELEGANCE PLUS and CHIC with Ø 20/25mm Aluminium tube or the models SPORT and SPORT PLUS with Ø20mm stainless steel tubes.
• Resin-coated acrylic is employed on Bimini-Tops with stronger frames like on the models ROYAL, ROYAL XL, LOOK UP, PRESTIGE and EXCLUSIVE with Ø 22/25/30mm stainless steel frame.

The frame is made of tubes and the diameter of these ones influences the overall strength of the Bimini Top.

The available diameters are 20/22/25/30mm:

• The aluminium or stainless steel frames with a diameter of 20mm are handy and light and suitable for small boats
• Whereas those with a diameter 22/25 or 30mm are recommended for larger boats. Whole stainless steel frames are very strong and of great aesthetic impact.