Bimini-Top SPORT with 4 arches and Ø 20 mm stainless steel frame
The SPORT model is light and sturdy, thanks to the stainless steel frame with high strength nylon jaw slides. The frame is easy to assemble and disassemble.
Dismountable structure (Ø 20 mm) AISI 316 polished Stainless steel tubes.
The sunroof material is the AIRTEX® fabric from Mehler Texnologies, it is weatherproof and UV-resistant, antimicrobial, as well as dirt and water-repellent. The fabric complies with the UNI EN 24920 standard and is available in 14 different colours. This 200 g/m² light fabric is a 100% polyester fabric that is acrylate-coated and impregnated on one side. The special coating gives the material a distinctive textile character. With a total weight of only 200 g/sqm, this quality achieves a very good sun protection effect according to UV Standard 801.
Joints and screws
Black nylon joints reinforced by fibreglass with high mechanical and corrosive resistance. Stainless steel screws.
The maximum recommended speed when cruising and the bimini is set up is 22 knots.
The bimini top is available in two different heights (C) 115 cm or 140 cm:
The height (D) of the folded convertible is 175 cm with a height of 115 cm and 195 cm with a height of 140 cm.
The length (B) is 230 cm (with a height of 115 cm) and 260 cm (with a height of 140 cm).
When the bmini top is completely folded and Ready to store the dimensions are: width x 40cm (16") x 8cm(3")
Scope of delivery
- Velcro closure storage bag (same colour like the bimini)
Please note that the fittings to mount your bimini to your boat are not included. These must be ordered separately.
The scope of delivery only includes the bimini frame fittings (see article picture).
The starting point
The first measurement to take is the width between the right centre gunwale to the left centre one of the boat or, in case of an inflatable boat, the width between the right centre tubular to the centre left one.
From this size it can be evaluated which model of Bimini Top can be installed.