Bimini-Top ELEGANCE with 2 arches / height 115 cm - width 110 cm lagoon

192,50 €
incl. 19% VAT ,

This model is particularly recommended for small inflatable boats and rowing boats, or for mounting on railings or handrails. It is available in two different heights, various sizes and 14 different colours.


  • Dimensions 
  • Colour 

Must be ordered. Ready for shipment in 7 days after order.

Delivery time: 9 - 11 Workdays

Bimini-Top ELEGANCE with 2 arches / height 115 cm - width 110 cm lagoon
192,50 €
incl. 19% VAT ,
Pcs.
Accessory selection - optional

Choose suitable accessories for this Bimini Top and save up to 10% discount.

  • Bimini-Top EPDM mounting kit for PVC inflatables

    EPDM support for Bimini Top installation on RIBs, designed to be glued on inflatables tubulars.

    The appropriate 2-component adhesive for PVC material is included. (125ml)

    Dimensions: Ø 77 x 40 (H) mm
    Hole: Ø 10 mm (enlargeable)

  • Bimini-Top EPDM mounting kit for Hypalon / Neoprene inflatables

    EPDM support for Bimini Top installation on RIBs, designed to be glued on inflatables tubulars.

    The appropriate 2-component adhesive for Hypalon / Neoprene material is included. (125ml)

    Dimensions: Ø 77 x 40 (H) mm
    Hole: Ø 10 mm (enlargeable)

  • Nylon deck fittings for mounting on the hull or any other flat surface on board.

    Distance between the holes: 40 mm.

    Available in white or black nylon.

  • Ø 20 mm aluminium tube (white coated) - 1 meter length.

  • Complete rail kit "ECO" for Bimini-Tops

    This system is recommended for light biminis with aluminum frame, as well as for small and medium-sized boats.

    The rail is made of aluminum and allows the bimini top to be moved.

    The included fittings are made of white nylon.

    The set includes:

    • 2 aluminum rails (each 100 cm long - can be shortened as desired)
    • 2 sliders which run on the rails and carry the deck fitting.
    • 2 deck fittings to accommodate the bimini
    • 2 end pieces for a clean finish to the rail
    • 2 stoppers to fix the bimini in the desired Position
  • TEX'AKTIV clean and care kit for Bimini-Tops

    Tex'Aktiv CLEAN fabric cleaner from SUNBRELLA / DICKSON

    Powerful outdoor fabrics cleaner recommended to eliminate stains and odours from sun shades, Bimini-Tops, cushions and deckchairs textiles.
    The use of TEX'AKTIV CLEAN will reduce the waterproof properties of textiles. So, after each cleaning process it is necessary to apply TEX'AKTIV to remake fabric waterproof and protect them from dirt.

    Yield: about 15 m² per 1 Liter.

    TEX'AKTIV GUARD waterproofing agent from SUNBRELLA / DICKSON

    Fabric waterproofing agent with water-repellent effect. TEX'AKTIV GUARD protects fabrics agaist stains and dirt build-up. This product is ideal for marine textiles, cushions and sun shades. It prevents water and grease from penetrating into the fabric. The colourless beading effect gives all your outdoor fabrics a fresh boost!

    Yield: about 15 m² per 1 Liter.

Your configuration

incl. 19% VAT ,


Bimini-Top ELEGANCE with 2 arches and Ø 20 mm aluminium frame

This bimini cover ist foldable, light and sturdy. It is recommended for small inflatable boats or rowing boats, as wells as for the use on railings and handrails.

Frame details

Foldable structure  (Ø 20 mm) with white lacquered aluminium-magnesium-silicon alloy.

Fabric details

The sunroof material is the AIRTEX® fabric from Mehler Texnologies, it is weatherproof and UV-resistant, antimicrobial, as well as dirt and water-repellent. The fabric complies with the UNI EN 24920 standard and is available in 14 different colours. This 200 g/m² light fabric is a 100% polyester fabric that is acrylate-coated and impregnated on one side. The special coating gives the material a distinctive textile character. With a total weight of only 200 g/sqm, this quality achieves a very good sun protection effect according to UV Standard 801.

Joints and screws

White nylon reinforced with fibreglass high mechanical and corrosion-resistant properties. Stainless steel and aluminium screws.

Max. speed

The maximum recommended speed when cruising and the bimini is set up is 15 knots.

Dimensions

The bimini top is available in two different heights (C) 115 cm or 140 cm:
 
The height (D) of the folded convertible is 145 cm if your height is 115 cm and 175 cm with a height of 140 cm. The Length (B) is always 170 cm.

Maßskizze für Bimini-Top

When the bmini top is completely folded and Ready to store the dimensions are: width x 40cm (16") x 8cm(3")

Scope of delivery

  • Velcro closure storage bag (same Colour like the bimini)
  • 2 row-lock attachment pins und 2 row-lock attachments
  • 10 Metes rope and 4 tensioner plates made from stainless steel
Manufacturer: Nettuno
Category: Bimini-Tops
SKU: 45009
GTIN: 4251967309125
Shipping weight‍: 6,00 kg
Item weight‍: 5,00 kg
Manufacturer information:
Nettuno
Measuring the width

The starting point

The first measurement to take is the width between the right centre gunwale to the left centre one of the boat or, in case of an inflatable boat, the width between the right centre tubular to the centre left one.

From this size it can be evaluated which model of Bimini Top can be installed.

Determine the width of the bimini on a sport boat Determine the width of the bimini on a Flybrdige Determine the width of the bimini on a Rib Determine the width of the bimini on a fisher boat
Width Flexibility
Determine the height
Numbers of arches
The fabric
The frame
Jaw Slides

0

Write the first review for this item and help others make a purchase decision!:

Assembly instructions for bimini top "Elegance"

Datasheet AIRTEX fabric

Fabric color chart

Verlinktes Drop wurde nicht gefunden!