Hydrodrive MSD70-TF MRA Stern-Drive kit for boats up to 12 m (40ft)

from 880,20 €
incl. 19% VAT , Free shipping (Standard)
New technology of hydraulic steering system, for boats up to 12m with stern-drives

For this product you will receive 880.2 Reward Points

Must be ordered. Ready for shipment in 6 days after order.

Delivery time: 7 - 8 Workdays

Hydrodrive MSD70-TF MRA Stern-Drive kit for boats up to 12 m (40ft)
from 880,20 €
incl. 19% VAT , Free shipping (Standard)
Zubehörauswahl - optional
  • HYDRODRIVE - APMF autopilot installation kit

    Description

    This installation kit is needed to connect an Autopilot to a TL1-16-MRA or TL2-30/40 MRA pump.

    All needed to connect the hydraulic Steering System to the main autopilot brand in the market.

    The kit contains the following components:

    • 1 x Twin Hose Set RS813AC5-16 / 5+5 Meter (16') with fittings
    • 1 x 10m hose kit (RS)
    • 1 x HROL hydraulik oil
    • Fittings: 2x TTN-14-10, 4x 97.40.00 Olive, 2x DTN-18-8, 1x TTN-18-8
  • HYDRODRIVE - TL2-30MRA-DS second Station kit

    Description

    This installation kit is needed to connect a second station or flybridge with your Hydrodrive stearing kit.

    It is compatible with all TL2-30 and TL2-30 MRA pumps and all MF255W-MF350W / MU75TFMRA / MSD70TFMRA / MF250WTF /  SHMF350W / TFSH stearing-kits.

    The kit contais the following components:

    • 1 x TL2-30 MRA-T pump mit tee fittings
    • 1 x 7m (23') twin-hose kit
    • 2 x hydraulik oil
    • Fittings
  • HYDRODRIVE - Twin hose extension kit for stearing Systems - 1,00 m

    Description

    This kit offers you an easy way to extend the standard twin hose lines of all Hydrodrive stearing kits. These Twin hoses have a lenght of 1,00 meter (3') and are ready to use with pre-installed connectors / Fittings AC516.

  • HYDRODRIVE - Twin hose extension kit for stearing Systems - 2,00 m

    Description

    This kit offers you an easy way to extend the standard twin hose lines of all Hydrodrive stearing kits. These Twin hoses have a lenght of 2,00 meter (6.5') and are ready to use with pre-installed connectors / Fittings AC516.

  • HYDRODRIVE - Twin hose extension kit for stearing Systems - 2.50 m

    Description

    This kit offers you an easy way to extend the standard twin hose lines of all Hydrodrive stearing kits. These Twin hoses have a lenght of 2.50 meter (8') and are ready to use with pre-installed connectors / Fittings AC516.

  • HYDRODRIVE - Twin hose extension kit for stearing Systems - 3.00 m

    Description

    This kit offers you an easy way to extend the standard twin hose lines of all Hydrodrive stearing kits. These Twin hoses have a lenght of 3.00 meter (10') and are ready to use with pre-installed connectors / Fittings AC516.

  • HYDRODRIVE - Twin hose extension kit for stearing Systems - 4.00 m

    Description

    This kit offers you an easy way to extend the standard twin hose lines of all Hydrodrive stearing kits. These Twin hoses have a lenght of 4.00 meter (13') and are ready to use with pre-installed connectors / Fittings AC516.

  • HYDRODRIVE - Twin hose extension kit for stearing Systems - 5.00 m

    Description

    This kit offers you an easy way to extend the standard twin hose lines of all Hydrodrive stearing kits. These Twin hoses have a lenght of 5.00 meter (16') and are ready to use with pre-installed connectors / Fittings AC516.

  • HYDRODRIVE - Twin hose extension kit for stearing Systems - 6.00 m

    Description

    This kit offers you an easy way to extend the standard twin hose lines of all Hydrodrive stearing kits. These Twin hoses have a lenght of 6.00 meter (20') and are ready to use with pre-installed connectors / Fittings AC516.

  • HYDRODRIVE - PL140+FR10+AD10 flushmount kit for TL2 pumps

    Description

    This kit contains a Fixing ring / flange, spacers (10-30mm / 0,4"-1,2").

    It allows you to flush mount a TL2 pump into your Station and getting a lower construction height. The spacers lets you vary the mounting depth.

  • HYDRODRIVE - EXTGTN-14-10 ellbow kit 90°

    Beschreibung

    This extension kit allows you to rotate the hoses 90°. Works with all TL1 and TL2 pumps. (1/4" Fittings)

  • HYDRODRIVE - MBY4 bypass Valve (inbaord application)

    Description

    This bypass valve is used with inboard system for safety purposes. It mounts near the cylinder and bypasses it in case the pump fails, allowing you to move the cylinder (rudder) by hand. In some countries it is an obligation to have it installed.

    Also included is a 2.00m twin hose kit with pre-installed fittings for easy installation.

Steuerradauswahl - optional
  • HYDRODRIVE - Stearing wheel 16000-VOR in red

    Description

    This stearing wheel is absolutely insensitive to all weather influences.

    This stearing wheel is made with a megol leather effect and PP carbon effect spokes. The hub is also made from PP. It has a Diameter of 280 mm (11") and a 3/4 shaft measurement.

  • HYDRODRIVE - Stearing wheel 16100-HDS in stainless steel

    Description

    This stearing wheel is absolutely insensitive to all weather influences.

    This stearing wheel is made from polished Stainless steel. The hub is made from aluminium. It has a Diameter of 340 mm (13.4") and a 3/4 shaft measurement.

  • HYDRODRIVE - Stearing wheel 16121-VSB in stainless steel / black

    Description

    This stearing wheel is absolutely insensitive to all weather influences.

    This stearing wheel is made from black polyurethane and has polished Stainless steel spokes and center. The hub is made from aluminium. It has a Diameter of 350 mm (13.8") and a 3/4 shaft measurement.

Your configuration

incl. 19% VAT , Free shipping (Standard)


HYDRODRIVE - MSD70-TF stern-drive hydraulic system for boats up to 12m (40ft)

Description

Hydraulic steering system with a high-precision hardened, hot-pressed aluminum pump and a CNC-machined, anodized and painted pump housing. The cylinder is made of cold-drown, hardened and also anodized and painted aluminum.

The entire system was developed for professional use with high quality, innovative technology. Thanks to the universal fittings, the Hydrodrive steering can be used for all types of outboard motors and offers a simple installation process.

Complete Stern-Drive System with anti-feedback valve and automatic pilot connection port. This system can be fitted with or without original engine servo steering.

The kit contains the follwoing components:

  • High Precision Hydraulic Pump TL2-30 MRA (28 cc pump) with a max. compressive strength of 80 bar. (with lock valve)
  • Hydraulic cylinder MC70 with a volume of 112 ccm, a max. compressive strength of 80 bar and a stroke of 202 mm.
  • 6+6 meter (20') high pressure twin hose set with fittings.
  • 2 liter hydraulic oil E-HVLP 46 (temp.+60°/-30°.)
  • Filling-Kit
  • 1 x extension rod 320mm (12,6")
  • 1 x extension rod 400mm (13,7")

Technical Data:

  • 4 Turns
  • 387 kgf (853 lbf) Output Force
  • 78 kgm (564 lbf-ft) Torque
  • 55 Knots / 100 km/h max. Speed
  • 36 months warranty
Manufacturer: Hydrodrive
Category: Hydrodrive Steering Systems
SKU: 88110
GTIN: 4251967349978
Engine type‍: Inboard
Shipping weight‍: 10,00 kg
Item weight‍: 9,00 kg

Advantages of a Hydrodrive steering system

Schnelle und einfache Monatge
Universell passender Zylinder für alle Arten von Aussenbordern
Pumpe und Zylinder kommen mit vormontierten Fittings
Die Schlauchleitungen haben ebenfalls vormontierte Fittings

0

Write the first review for this item and help others make a purchase decision!:

Installation instruction for Hydrodrive steering kits

Click on the video to start the video embedding by Youtube.